Uni-Vent III-DT™ 

The Universal Ventilation System

 
 
img13.jpg
img16.jpg
img58.jpg

Uni-vent III will conform to virtually any roof panel configuration. It compresses and fills every void between your ridge cap and the roof panel. Factory applied glue strips allow the installer to roll out Uni-vent III and apply it to the ridge cap, even in windy conditions. Then, fasten to vented ridge cap to finish off the installation. 

  •  Material is 2" wide with standard thickness of 1"
  • Stock one product to match any roof panel configuration
  • Use any manufacturers ridge cap
  • Use on any roof pitch from 2/12 to 20/12
  • Thicker product available for R-Panel and other higher rib configurations 

Physical Properties:

  • Standard 1” x 2” x 10’ pieces (10/box)

  • Stock one product to match any roof panel configuration

  • Apply directly to ridge cap

  • Pure Polyurethane Foam

  • Vinyl Coating

  • UV Stabilized/Fire Retardant

  • Continuous Glue Strip 

Available in 100' packages (10 - 10' rolls per box)